ACT-1B Panel Tachometer

ACT-1B Panel Tachometer
Product Description

Features:

  • Economically priced
  • 1/8 DIN sized
  • 5 Digit LED display
  • 5 to 99,999 RPM range
  • Universal sensor inputs
  • Compatible with most speed sensors
  • User configurable*
  • View real-time data on PC*
  • Store data in Excel file inreal-time*
  • Universal A/C power 100 to 240 VAC,50/60Hz or optional DC input power
  • Optional 4-20mA or 0-5Vdc scalable out put

*Requires optional USB programming cable and PM Remote Software

Specifications:

Speed Range

5 to 99,999 RPM

Accuracy

+/-1 RPM or 0.005Percent of reading

Resolution

1 RPM

Display

5 digit, 0.56 Percent (14mm) high red LED.

Display Update

Twice per second above 120 RPM.Programmable with PM Remote Software and USB programming cable.

Dimensions

1/8 DIN by 4.5 inch(114 mm) deep. Panel cut out: 3.58 inch x 1.74 inch (91 x 44 mm)

Input Power:

Standard

100 - 240 VAC+/-10 Percent, 50/60 Hz, Optional: 12 or 24 VDC +/-10 Percent, Isolated, 6VA.

Inputs

Universal input for optical, proximity, two wire or three wire magnetic, in frared or laser sensors.TTL input or 3.3 VAC to 50 VAC input. Standard input is 1 pulse per revolution.

Sensor Excitation

5 VDC or optional 12 VDC or 24 VDC to sensor.

Recommended Sensors

Optical - Monarch ROS-W,ROS-P-25, ROS-HT-W-25, ROSM-5W Proximity - Monarch P5-11 Magnetic - MonarchM-190W or MT-190W In frared - Monarch IRS-W Laser - Monarch ROLS-W, SLS-115/230Inductive - Gas Engine GE-200 (with amplifier)

Pulse Repeater Output

(Optional) 

0to 5 V TTL pulse, non-inverting, one pulse out for each pulse in. Positive or negative out. Programmable using PM Remote Software and USB programming cable.

Analog Output

(Optional)

VOLTAGE (AO)

0 to 5 VDC out, 5 mA16 bit resolution. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and USB programming cable.

CURRENT (IO)

4 to 20 mA out, 16bit resolution 12VDC compliance voltage. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and optional USB programming cable.

Remote Programming

Unit can be remotely programmed using optional communications interface cable and PM Remote Software.

Environmental

Indoor use only, Installation category II per IEC 664

Temperature

-10 degree C to 50 degree C operating per IEC 61010-1

Humidity

Maximum relative humidity 80 Percent for temperatures up to 31 degree C, decreasing linearly to 50 Percent relative humidity at 40 degree C.

Electrical Safety

Meets EN61010-1:2001, EC low voltage directive 72/23/EEC and 89/336/EEC


Contact Us

17-B, Tarun Industrial Estate, Mogra Pada, New Nagardas Road, Andheri (East), Mumbai, Maharashtra, 400069, India
Phone :+918068090472