AMBETRONICS ENGINEERS PVT. LTD.
Batch Counter

Batch Counter

Send Inquiry

From our wide collection of process control instruments, we are offering to our clients an excellent range of  Batch Counter. all these counters keeps a count of different finished products like sheets, clothes, wires and rods in industries during manufacturing. Available with the option of RPM and RPS, these counters have three soft membrane keys on the front panel for the setting. We make sure to test each and every Batch Counter on varied parameters of spike protection and vibration before the final dispatch.

Features

  • Available in three industrial sizes
  • Superior in technology
  • Light in weight

PC 201 Batch Counter

FEATURES:


  • Auto resolution R.P.S. or R.P.M.
  • R.P.S. (Revolution per second or pulse per second) or R.P.M. (Revolution per minute or pulse per minute) User selectable.
  • 2 Nos. LED used for RL1(Alarm1) & RL2, (Alarm2).
  • 11.059 MHz quartz crystal for high accuracy.
  • Two independent set points programmable in 3 different control actions, like normally ON, normally OFF, pulse output.
  • Built-in watch-dog circuit for fail safe operation.
  • Relay output for each set point with NO / C / NC output.
  • +12VDC, 50mA built in supply for proximity, Infrared sensor.
  • Program setting by three soft membrane keys on the front panel.
  • Three different industrial sizes are available on request.
  • Remote & manual reset facility.
  • Option :- 4-20mADC/0-2V or 100Hz to 10KHz output for retransmission with respect to R.P.M. speed.

 APPLICATION: 

 

  • Counting number of pieces.
  • batch counter.
  • preset counter of cloths.
  • Cables/ wires/ ropes/ sheets Counting etc. 

 

TECHNICAL SPECIFICATION

Display

5 digit of 13.0mm. height 7 segment red colour bright L.E.D display.

Range

0-9999 count, 5 digit / 0-99999, 5 digit is also available on request.

Accuracy

Absolute.

Output

1NO / C rated 6A at 230VAC.

Resolution

Auto resolution.

Time Base

11.059 MHz Quart crystal time base.

Set point

2 Independent set point setting via front panel key pad. 

Relay action

Delay OFF, Delay ON, Pulse output (Programmable). 

Sensor supply

+12Volt with 50mA capacity to operate proximity, Infrared, Switches etc.

Terminals

16No. PBT Connector for 2.5Sq.mm. Pin type lugs or 2.5 Sq.mm. wire.

Multiplier

From 0.001 to 9999. Scale factor facility.

Count Mode

Count Up, Count Down, (Programmable).

Reset

Manual by pressing (-) keys or Remote (Reset) from back side connector.

Dimension

72 (W) X 72 (H) X 120 (D) in mm., 96 (W) X 48 (H) X 120 (D) in mm. , 96 (W) X 96 (H) X 120 (D) in mm. 

Cutout

68 (W) X 68 (H) in mm., 92 (W) X 44 (H) in mm., 92 (W) X 92 (H) in mm.

Cabinet

ABS plastic, Black / White colour.

Mounting

Panel mounting.

Application

 Counting number of pieces, batch counter, preset counter of cloths, cables, wires, ropes, sheets Counting etc.