- LED display Indication for Temperature , Humidity and Differential Pressure at a time.
- Remote Temperature and RH sensor Connection facility
- Independent Programmable alarm for Temperature, Humidity and Differential Pressure.
- In built Buzzer for Alarm set points with acknowledgment facility
- Software calibration facility.
- Password protected programming.
- Isolated RS-485 communication with Modbus RTU Protocol.
- Clean room application in Pharmaceutical
- Pharma Environments monitoring applications.
- HVAC (Heating, ventilation, Air conditioning, Cooling).
- Animal house clean room
Remote Humidity and Temperature Sensor, Built in differential pressure sensor with Brass Hose Nipples (Chrome Plated) for +ve Pressure connection& -ve Pressure connection provided on SS front plate
Upper 4 digit Seven segments 0.4 inch RED LED display
Middle 4 digit Seven segments 0.4 inch RED LED display
Lower 4 digit Seven segments 0.4 inch RED LED display
3 LEDs for alarms Integrated Buzzer for process violation of alarm limits any of the 3 parameters.
+/- 0.5% of FS
+/- 1.8 Percent of FS
+/- 0.5 % of FS
-30.0 Degree Centigrade to 50.0 Degree Centigrade
0 Percent to 100 Percent RH
-500 to 500 pascal
0.1 for Temperature and RH, 1 for Differential Pressure
Isolated RS-485 communication with Modbus RTU Protocol
Baud rate, Parity, Data bits, Stop bits
No. of salve ID
Programmable as per input selection
Programming of parameters
3 Nos. push button front keys (with password protection) Alarm logic: High or Low programmable
Operating Ambient Temp.
0 to 50 Degree Centigrade
Below 90 Percent RH, Non condensing.
Flush mounting plate
Front plate size
110 mm(W) x90 mm(H)
76 mm (W) x 70 mm(H) x 45 mm(D) MS with powder coated
Modular wall mounting with Stainless Steel Front
24VDC +/- 10 Percent
Less than 1.2 watt at 24VDC
17-B, Tarun Industrial Estate, Mogra Pada, New Nagardas Road, Andheri (East), Mumbai, Maharashtra, 400069, India