- Minimum Order Quantity :
- Unit of Measure :
- Power Supply :
- 24 VDC +/- 10%
- Power Consumption :
- Less than 1.2 watt at 24 VDC Kilowatt (kW)
- Accuracy :
- Temperature: +/- 0.5 Percent of FS ; Humidity: +/- 2 Percent of FS ; Differential Pressure: +/- 1 Percent of FS mm
- Display Type :
- Digital Only
- Size :
- Front plate size: 110 mm(W) x90 mm(H) ; Back enclosure: 76 mm (W) x 70 mm(H) x 45 mm(D) MS with powder coated
Clean Room Temperature/ Relative Humidity/ Differential Pressure Monitor
- LED display Indication for Temperature , Humidity and Differential Pressure at a time.
- Remote Temperature and RH sensor Connection facility.
- Independent Programmable alarm for Temperature, Humidity and Differential Pressure.
- In built Buzzer for Alarm set points with acknowledgement facility.
- Software calibration facility.
- Password protected programming.
- Isolated RS-485 communication with Modbus RTU Protocol.
- Clean room application in Pharmaceutical.
- Pharma Environments monitoring applications.
- HVAC (Heating, ventilation, Air conditioning, Cooling).
- Animal house clean room.
Integrated / Remote Humidity and Temperature Sensor, Built in differential pressure sensor with Brass Hose Nipples (Chrome Plated) for +Ve Pressure connection & -Ve Pressure connection
Upper 4 digit Seven segments 0.4 RED LED display
Middle 4 digit Seven segments 0.4ÃÂ RED LED display
Lower 4 digit Seven segments 0.4 RED LED display
3 LEDs for alarms Integrated Buzzer for process violation of alarm limits any of the 3 parameters.
Range & Resolution
-30.0ÃÂ°C to 50.0ÃÂ°C
0% to 100 % RH
0.1 for Temperature and RH
(-100 to 100) mmWC
(-10 to 10) cmWC
(-7.5 to 7.5) mmHG
(-500 to 500) Pascal
(-10 to 10) Hectopascal
ÃÂ± 0.5% of FS
ÃÂ± 2 % of FS
ÃÂ± 1 % of FS
Isolated RS-485 communication with Modbus RTU Protocol
9600 bps, Parity, Data bits, Stop bits
No. of salve ID
Programmable as per input selection
Programming of parameters
3 Nos. push button front keys (with password protection)
High or Low programmable
Operating Ambient Temp.
0 to 50ÃÂ°C
Below 90% RH, Non condensing.
24VDC ÃÂ± 10%
Less than 1.2 watt at 24VDC
Flush mounting plate
Front plate size
110 mm(W) x90 mm(H)
76 mm (W) x70mm(H) x45mm(D) MS with powder coated
Modular wall mounting with Stainless Steel Front
17-B, Tarun Industrial Estate, Mogra Pada, New Nagardas Road, Andheri (East), Mumbai, Maharashtra, 400069, India