- Piece/Pieces
- 1
- Piece/Pieces
- 8000.00-
- 24VDC +10%
- ñ2% of Full Scale Value. %
- Digital Only
Gas leak sensing is the procedure of identifying hazardous gas leaks using high-end sensors to provide safety to place and people. Gas sensor is a device developed using an audible alarm to aware people when a dangerous gas is leaked and detected. This is widely used in the domains of fuel filling, construction, painting, fumigation, excavation of soils, confined spaces, landfill operations, etc. This is appropriate for detecting LPG, CH4, H2, CO, Alcohol, Propane or any other harmful gas. With high sensitivity and quick response time, this ensures prompt detection to provide time to people to evacuate the space and safe themselves. Its sensitivity can be adjusted by using potentiometer. This sensor has analog resistance to provide maximum output.
- Dual Display Of Gas Concentration & Unit Of The Gas
- Plug In Smart Field Proven Sensor
- Micro controller Based Latest, Accurate, Reliable & High Performance Technology
- Programmable Linear 4-2omAI 20-4mA OIP With Respect To Gas Concentration Easy One Man Calibration At Site
- Password Protected Programming With Password Changing Facility
- Suitable In Hazardous Area ATEX, CCOE, CMRI & IP- 65 Approved
- Ready To Use With Any DCS, PLC & Ambetronics Controllers
Applications of Gas Sensor:
- Oil & Gas Industries
- Chemical & Petrochemical Plants
- Chemical Processing Plant
- Pulp & Paper Plants
- Acid Alkalizes & Dyes Mfg. Plants
- Offshore Drilling & Processing Platforms
- Refineries
- Stack Monitoring
- Chemical Storage Area
- Ambient Monitoring
- Sewage Plants
- Fertilizers Plants
- Power & Industrial Plants
- Gas Metering Station
- Bullet Yard I Storage Yard
- Coal Mine and Confined Area
- Gas Pipeline Project
- Gas Cylinder Bank
- Heat Treatment Plants
- Automotive Industries I Paint Shops
- Burner / Furnace Areas
Gas Sensor Technical Specifications :
| Input | Oxygen / Toxic gases, Please select from the Table | |
| Range / Resolution | As specified in the Table | |
| Accuracy | 1% of the full scale value | |
| Sensor type | Electrochemical / Catalytic Pellister / Solid state / Infra Red based Sensors | |
| Standard output | Programmable Linear 4-20 / 20-4mA O/P with respect to Gas concentration range | |
| Dual Display | Upper :-4 Digit of 0.3''(H) Red LED display for 'Gas Concentration' indication | |
| Lower :-4 Digit of0.3''(H) Red LED display for Unit of Gas | ||
| LED Indication | FLT for Fault condition, PRG for Programming mode, TST for Test mode, | |
| Setting | Setting by 4 keys on front panel i.e. SET / NEXT', 'UP', 'DOWN' & 'TEST / BACK' | |
| Monitoring | i) By display : Sensor break / open shows under range shows & over range shows | |
| ii) By Standard O/P current : Up scale current : 21mA, Down scale current : 3mA, selectable | ||
| Supply Voltage | 18VDC to 36VDC | |
| Cable | 1.5 sq. Mm 3 Core, Flexible OR Armoured shilded cable | |
| Operating Temperature | 0 to 50 ºC ± 5% | |
| Relative Humidity | Below 95% non condencing | |
| Sensor Housing | P.V.C. / P.P. / PTFE material / SS304 / SS316, Please specify while ordering | |
| Enclosure Detail | GT 4000 WP ( Weatherproof) | GT 4000 FLP ( Flameproof) |
| Protection Class | IP-65 | IP-65 for Gas Gr. IIA & IIB, ATEX, CCOE & CMRI Approved |
| Cabinet Material | Polycarbonate, gray colour | Cast Alluminium alloy, LM-6 / C.I. Enclosure |
| Cable Entry | 1 No, Thermoplastic cable gland (IP68) | 1 No. Double compression cable gland (Ex-Proof), ET type |
| Dimension | 190mm(H) x 80mm(W) x 55mm(D) | 190mm(H) x 185mm (W) x 100mm (D) |
| Mounting | Wall Mounting / Stand Mounting | Wall Mounting / Stand Mounting |
| Weight | 250 Grams | 1 Kg |
- Mumbai
- 300 Per Day
- 1 Week
- All India
17-B, Tarun Industrial Estate, Mogra Pada, New Nagardas Road, Andheri (East) Mumbai Maharashtra India +918037301604
Phone :+918037301604
