- IntelliMaster is a 16/32 Channel Modbus ID Monitoring System for Transmitters are having RS-485 Modbus RTU Network Connectivity.
- IntelliMaster has one more RS - 485 Modbus RTU Port for Remote Repeater Panel called as IntelliRepeaterwhich will repeat all readings & Alarm conditions.
- Multidrop RS - 485 Port eliminates separate cabling to each Transmitter and Monitor Panel.
- Modbus - RTU Network can be connected in Ring Topology for Redendency.
- Scan time for 16 Transmitter < 5 sec. & for 32 Transmitter < 10 sec.
- Large 16 x 4 line Display with Configurable Backlit Option.
- Auto Page Changing Facility available for easy viewing of Data, Relay & Fault Condition of each Transmitter.
- Optional 8 Relays (SPDT) rated "10A / 250VAC, 10A / 30VDC" as Warning / Trip Relay with 1 no. Failsafe Relay which activates for UNDER / OVER / OPEN Condition of Transmitter.
- Separate Alarm Setting for each Transmitter with Logic High / Low & Latching Facility.
- Password Protected Menu with Password Changing Facility.
- Easy Handling & Programming with 3 keys on Front Panel.
- Clean Room Monitoring & Validation in Pharmaceutical, Laboratories, Bioscience
- Room Mapping in Pharmaceutical
- Pharmaceutical process validation with graph & scale report in Autoclave
- Healthcare, Hospitals, Shopping Malls
- Breweries, Steel Plants, Gas Turbines,
- Leak detection, Solvent Vapors,
- Personal Monitoring, Compressor Stations,
- Emergency response, Equipment Maintenance
- Pulp & Paper Industry, Fuel Loading Facilities
- Waste Water Treatment Plants,
- LNG / LPG Processing & Storage Facilities
- Refineries & Petrochemical Plants Including Offshore
- Drilling & Plant Shut-downs
- ISO Certification Records, Validation process certifying,
- Chemical & Hazardous area where data monitoring is essential
- Food Processing
- Cold Storage & Chilling Plant
- Building Management & Energy Saving Systems
- Meteorological, Weather Forecast Applications
- Remote Indication location on tank taps as used in liquid level sensing & control General
- InputD: 16/32 Transmitters having RS-485 Modbus RTU Port.
- 16 x 4 Alphanumeric LCD with Configurable Backlit option.
- 8 LEDs to indicate status of IntelliMaster.
- 48 LEDs to indicate Alarm status of Transmitters in Group Function.
Performance Scan Time
- 2 independent Alarm set points for each Transmitter with Latch & Non-Latch Facility.
- User selectable Hysteresis & Logic Operation.
- Setting: By using 3 keys on the front panel for WP & FLP models.
- Less than 5 Sec. for 16 Transmitters having RS-485 Modbus RTU Port.
- Less than 10 Sec. for 32 Transmitters having RS-485 Modbus RTU Port
- Supply Voltage: 190 to 270 VAC; 20%, 50Hz.
- Power Rating: Approx 20W.
- Transmitter: 24VDC, 4A for 16 Transmitters.
- Supply: 24VDC, 7A for 32 Transmitters.
- 1.5mm2 2 Core Shielded Cable for 24 VDC Power Supply.
- 1.0mm2 2 Core Twisted Pair Cable for RS-485 Modbus RTU Communication.
- Storage Temp.: -20 to 60oc
- Operating Temp.: -30 to 70oc
- Humidity: Below 95% Non-Condensing
Output Signal (Optional) Relay Output
- Protection Class: IP-65
- Cabinet Material: Polycarbonate, Grey Colour.
- Cable Entry: Thermoplastic (IP-68) for Weatherproof
- Dimension: 305 mm (H) x 325 mm (W) x 170 mm (D)
- Mounting: Wall Mounting / Stand Mounting
- Weight: Approx 3.7 kg.
- 9 SPDT Relays of rating "10A/250VAC, 10A/30VDC".
- 4 No. Relay for Warning & 4 No. for Trip & 1 no. for Failsafe Operation for UNDER / OVER / OPEN condition of Transmitter.
- Open Collector: Open Collector output with 100mA current capacity instead O/P of Relay.
- RS-485 Port: Separate RS-485Modbus RTU Port for IntelliRepeater or PC Communication at a time one Function is possible.
- During Sensor Break / Open in the Transmitter connected to it, IntelliMaster shows 'SENSOR OPEN' & Failsafe Relay activates.
- During Over Range in the Transmitter connected to it, IntelliMaster shows 'OVER RANGE' & Failsafe Relay activates.
- During Under Range in the Transmitter connected to it, IntelliMaster shows 'UNDER RANGE' & Failsafe Relay activates.
- If communication fail occurs with any Transmitter then IntelliMaster shows 'SLAVE NOT RESPONDING' for that Transmitter.
- FLP / WP Junction Box Enclosure for Inter Connection between Transmitters & IntelliMaster for easy maintenance.
- IntelliRepeater Slave Monitor for Remote Display.
- Hooter cum Flasher works on 24VDC or 230VAC.
- RS-485 to USB OR RS-232 convertor.
- Protection Class: IP-65 for Gas Gr.IIA & IIB, CMRI approved enclosure & CCOE (optional).
- Cabinet Material: Cast Aluminium alloy, LM-6
- Cable Entry: 3/4" ET-Type for Flameproof
- Dimension: 430 mm (H) x 410 mm (W) x 170 mm (D)
- Mounting: Wall Mounting / Stand Mounting
- Weight: Approx 13 kg.