Loop Power Indicator Panel Mount

Loop Power Indicator Panel Mount
Product Description


  • Minimum loop voltage drop
  • Option of range locking and unlocking
  • High level of accuracy
  • User Programmable with Password Protection.
  • Easy Programming with Push Buttons.
  • Software Calibration - No Trim pots.
  • Reverse Polarity Protection.
  • Loop Voltage Drop < 5 VDC.
  • 4-20 mA Loop Current Input from Transmitters.
  • Accuracy +/- 1 percent Of Full Scale Value.
  • 0.5 inch, 3 1/2 Digit L.C.D Display.
  • Range Locking / Unlocking Facility.
  • Offset Facility To Compensate Field Error.
  • Operational Mode Linear / Square Root; Programmable by user.


  • Provides Process value Indicator in various Industrial Control & Measurement Application such as Pressure, Flow, Level, Temp.,Humidity etc.
  • Remote Indicator at point of measurement or at control end especially where there is no power source.
  • Being Non Voltage Producing Device can be directly used in Hazardous Area with Suitable Enclosure.
  • Replaces an Analog Meter with no additional wiring and power connection.
  • Can be inserted at any point in signal loop as a standaloneas it requires no external power.
  • Remote Indication location on tank taps as used in liquid level sensing & control.


Technical Specifications:-


4 - 20 mA Loop Current Input from any 2 / 3 WireProcess Transmitter


-1999 To 1999 with Range Lock / Unlock; programmableby user


0.001, 0.01, 0.1, 1; programmable by user


Linear - +/-0.1 percent of span; Square root - +/-0.2percent of span

Operational Mode

Linear & Square root; programmable byuser

Loop Voltage Drop

< 5 VDC


0.5 inch, 3 1/2 digit L.C.D Display

Display Update Rate

Linear mode - 0.8 sec; Square root mode- 0.8 sec


Display shows Und, when I/P current fallsbelow 3.6 mA

Display shows our, when I/P current goes above 20.5 mA

Operating Temperature

- 40 To 85 Deg.C

Relative Humidity

Below 95percent non condensing

Warm up Time

10 Sec

Enclosure Detail


Protection Class

IP - 40

Cabinet Material

ABS PLASTIC, White Colour

Cable Entry

Terminal Connector For Connection


96 (H) X 96 (W) X 75 (D) in mm


92 (H) X 92 (W) in mm


Panel Mounting


Approx. 250 Grams

Contact Us

17-B, Tarun Industrial Estate, Mogra Pada, New Nagardas Road, Andheri (East), Mumbai, Maharashtra, 400069, India
Phone :+918068090472