Panel Mount Loop Power Indicator (LPI-400 PM)

Panel Mount Loop Power Indicator (LPI-400 PM)
Panel Mount Loop Power Indicator (LPI-400 PM)
Price And Quantity
  • Piece/Pieces
  • 1
  • Piece/Pieces
  • 1000.00-
    Product Specifications
    • Linear : +/-0.1 Percent of span ; Square root : +/-0.2 Percent of span %
    • 96(H) x 96(W) x 85(D) in mm
      Product Description

      Features:-

      • User Programmable With Password Protection.
      • Easy Programming with Push Buttons for WP & PM Model.
      • Temperature coefficient of accuracy 0.005 Percent FS/Deg.C
      • Software Calibration No Trimpots.
      • Reverse Polarity Protection.
      • Loop Voltage Drop <4.8 VDC.
      • 4 - 20 mA Loop Current Input from Transmitters.
      • Accuracy +/-0.1percent Of Full Scale Range.
      • 4/5 Digit LED Display.
      • Range Locking /Unlocking Facility.
      • Offset Facility To Compensate Field Error.
      • Operational Mode Linear / Square Root; Programmable by user.
      • No external Power Supply is required.

      Applications:-

      • Provides Process value Indicator in various Industrial Control & Measurement Application such as Pressure, Flow, Level, Temp., Humidity etc.
      • Remote Indicator at point of measurement or at control end especially where there is no power source
      • Being Non Voltage Producing Device can be directly used in Hazardous Area with Suitable Enclosure
      • Replaces an Analog Meter with no additional wiring and power connection
      • Can be inserted at any point in signal loop as a stand alone as it requires no external power
      • Remote Indication location on tank taps as used in liquid level sensing & control

      General :

      Input

      4-20 mA Loop Current Input from any 2 / 3 Wire Process Transmitter

      Range

      LPI -400 -PM :(-1999 to 9999)  with AL1& AL2 indication

      Resolution

      0001, 000.1, 00.01,0.001

      Offset

      Adjustable upto +/-10Percent of range

      Display

      0.39 inch 5 Digit Red LED Display

      Display Update Rate

      Linear mode- 1 sec;Square root mode- 1sec

      Monitor:

      i) Display shows UndEr/Undr , when I/P current falls below set UNDER value (from 3.6mA to 3mA,settable)

      ii) Display showsouEr, when I/P current goes above set OVER value (from 20.5mA to 21mA,settable)

      Operational Mode

      Linear & square root; programmable by user

      Calibration

      S/W calibration

      Performance:

      Accuracy

      Linear : +/-0.1Percent of span ; Square root : +/-0.2 Percent  of span

      Temperature coefficient of accuracy:

      0.005 Percent FS/Deg.C

      Warm up Time:

      10 Sec

      Electrical:

      Loop voltage drop

      < 4.8V DC

      Environmental:

      Operating Temperature

      -10 to 50 Deg.C

      Relative Humidity

      Below 95 Percent non condensing

      Panel Mount Housing:-

      Protection Class

      IP-40

      Cabinet Material

      ABS Plastic, Black colour

      Cable Entry

      Terminal Connector for Connection

      Dimension

      96(H) x 96(W) x 85(D) in mm

      Mounting

      Panel Mounting

      Weight

      Approx. 250 Grams

       

      Trade Information
      • 200 Per Week
      • 3-4 Week
      • All India
      Contact Us

      17-B, Tarun Industrial Estate, Mogra Pada, New Nagardas Road, Andheri (East) Mumbai Maharashtra India +918037301604
      Phone :+918037301604