- Minimum Order Quantity :
- Unit of Measure :
- Accuracy :
- As mentioned in the product discription %
- Material :
- ABS Plastic
- Voltage :
- 230 VAC +/- 10 percent OR 110 VAC +/-10 percent OR 24 VDC Volt/Ohm (v/ohm)
- Size :
- 96(W) x 48(H) x 120(D) in mm
- Weight :
- Approx. 1.0 Kilograms (kg)
Based on state of art latest microcontroller technology withwatchdog features for fail safe operation.
Input RTD (PT100),J,K Thermocouples 4-20 mA factorysettable.
Automatic cold junction compensation for thermocouples.
Automatic wire length compensation for long wire RTD inputs.
Very high accuracy 0.25 percent, with software linearization.
Easy on-line field calibration to user by front keys.
Two independent set points with individual relay output withhysteresis settable.
Programmable latch OR non-latch facility for relay output.
Isolated retransmission output for process value with programmablerange can be set by user.
Flameproof version is available on request.
Cold storage and Chilling plant
Constant temperature bath and environmental chamber
Plastic/Packaging/Rubber and Metal Industry.
Input: 4-20 m; Range: -999to 9999; Resolution: 0.001,0.01,0.1,1;Accuracy: +/-0.25% ofFull scale;
Input: RTD (PT-100); Range: -50 to 400 Deg.C; Resolution: 0.1 Deg.C; Accuracy: +/-0.25%of Full scale;
Input: K-Type; Range: -50 to 1200 Deg.C; Resolution: 1 Deg.C; Accuracy: +/-0.25% of Full scale;
Input: J-Type; Range: -50 to 600 Deg.C; Resolution: 1 Deg.C; Accuracy: +/-0.25% of Full scale;
Automatic wire length compensation for long wire RTD (PT-100)sensor
Automatic Cold Junction Compensation for Thermocouple (J orK type)
Temperature sensor break OR sensor open, display show openindication.
Under range Undr over range ovEr indication for 4-20 mA.
Upper- 4 digit, 0.56inch (13 mm), 7-Segment RED L.E.D display for Process value indication.
Lower- 4 digit, 0.56inch (13 mm), 7-Segment RED L.E.D display for Set point value indication of RL1.
RL1 & RL2 for Relay
Two independent set point with individual relay output with hysteresissettable. Programmable latch OR non-latchable for both relay output
LO-HI, HI-LO, LO - Very LO, HI - Very HI control action forrelay; programmable by user
0-9999 sec, Common setting for RL1 & RL2 to operateafter the Process Value crosses the Set Point Value
Relay contact type:
1 NO-C-NC Relay Contact Rated 230 VAC/5A for RL1 & RL2
Configuration of relay:
RL1 Operates for set point 1, RL2 operates for set point 2
In Under, Over OR Open condition i.e. fault condition, Relaycan be made OFF or ON; programmable by user.
Setting by 3 keys on front panel.
1 No. 4-20 mA output with MAX load 750 ohms
230 VAC +/- 10percent OR 110 VAC +/-10 percent OR 24 VDC
-40 to 85 Deg.C
Below 95 percent non condensing.
Protection Class: IP-40
Cabinet Material: ABS Plastic
Cable Entry: Terminal connector for connection
Dimension: 96(W) x 48(H) x 120(D) in mm
Cutout: 92(W) x 44(H) in mm
Mounting: Panel Mounting
Weight: Approx. 1.0 Kg.
17-B, Tarun Industrial Estate, Mogra Pada, New Nagardas Road, Andheri (East), Mumbai, Maharashtra, 400069, India