Cookie Img

Panel Tachometer

Panel Tachometer
Panel Tachometer
Product Code : ACT-3X
Price And Quantity
Minimum Order Quantity :
1
Unit of Measure :
Piece/Pieces
Product Specifications
Power Supply :
Standard: 100 - 240 VAC +/-10 Percent, 50/60 Hz, Optional: 12 or 24 VDC +/-20 Percent, Isolated, 8VA
Accuracy :
+/-0.001 Percent of reading or +/-1 displayed resolution (Standard Gate), +/-0.06 Percent of reading or +/-1 displayed resolution (Fast Gate). mm
Display Type :
Digital Only
Range :
As mentioned in Product Description
Size :
1/8 DIN by 4.5 inches (114 mm) deep ;Panel cutout: 3.58 inches x 1.74 inches (91 x 44 mm)
Product Description

Description:-

The ACT-3X Panel Tachometer is a powerful NIST calibrated fully programmable tachometer and totalizer. It accepts inputs from all Monarch speed sensors or from any standard TTL generating device. The unit operates from 120/240Vac input power or from 12 or 24Vdc input power (optional).Programing is easily performed through the 5 front panel push buttons or using the optional PM Remote Software. Set up for single channel monitoring. Programmable scale factor with menu selection for multiple pulses per revolution, linear rates, to talization, single event trip speeds (using auxiliary input) and rateof change in rpm. A TTL pulse repeater output is standard.

Features:-

  • 1/8 DIN sized
  • 5 Digit LED display
  • 5 to 999,990 RPM range
  • Universal sensor inputs
  • N.I.S.T. Traceable Certificate of Calibration included
  • User configurable with front panel push buttons or Optional PM Remote Software
  • View real-time data on PC*
  • Record data in .CSV format in real-time*
  • Universal A/C power 100 to 240 VAC, 50/60Hz or optional 12or 24VDC power
  • Standard pulse repeater output
  • Single event capture from start and stop pulses, in units such as MPH, CM/sec, etc. Using two sensors - for linear rate of travel on second input channel
  • Optional 4-20mA or 0-5VDC scalable output
  • Optional Ethernet or USB communications
  • Optional alarm relay outputs

Specifications:-

Speed Range

5 to 999,990 RPM (single pulse per revolution), 0.5 to 999,990 RPM (10 pulses per revolution). Speeds below 5 RPM are possible with multiple pulses per revolution

Input Frequency Range

0.083 Hz to 80 kHz

Totalizer/Counter

Display Range

0.001 to 99,999 (Only top 5 digits are shown for 100,000-999,990) Max # of counts=16,777,216 even with 0.001 scale

Input Configuration:-

Universal Inputs

1 to 9,999 pulses per revolution, front panel push button programmable TTL input and 1.1V to 50VAC signals, Opt: -1 to-50VDC

Accuracy

+/-0.001 Percent of reading or +/-1 displayed resolution (Standard Gate), +/-0.06 Percent of reading or +/-1 displayed resolution (Fast Gate).

Resolution

Up to 0.001 RPM, 10 RPM (100,000 to 999,990RPM).

Display

5digit, 0.56 inches (14 mm) high red LED.

Display Update

Menu Selectable between: 0.5 second above 120 RPM, 1 second above 60 RPM and 1.5 seconds above 40 RPM.

Max Measurement Rate

Up to 100 times per second (Standard Gate) or up to 1000(Fast Gate) dependent on input frequency. Input must be measurement rate.

Scaling:

Programmable scaling

0.0001 to 9999.9 (front panel push button programmable).

Decimal Point

User Selectable (0-3) decimal places max (front panel push button programmable).

Memory

Maximum, minimum and last reading recall from front panel push buttons.

Dimensions

1/8 DIN by 4.5 inches (114 mm) deep.

Panel cut out

3.58 inches x 1.74 inches (91 x 44mm)

Input Power:

Standard

100 - 240 VAC +/-10 Percent, 50/60 Hz, Optional:12 or 24 VDC +/-20 Percent, Isolated, 8VA

Inputs

Universal input for optical, proximity, two wire or three wire magnetic, in frared or laser sensors. TTL input or 3.3 VAC to 50 VAC input.Standard input is 1 pulse per revolution.

Sensor Excitation

5VDC or optional 12VDC or 24VDC to sensor.

Recommended Sensors

Optical - Monarch ROS-W, ROS-P-25, ROS-HT-W-25 , ROSM-5WProximity - Monarch P5-11 Magnetic - Monarch M-190W or MT-190W Infrared -Monarch IRS-W Laser - Monarch ROLS-W, SLS-115/230 Inductive - Gas Engine GE-200(requires amplifier)

Pulse Repeater Output

Standard , 0 to 5 V TTL compatible. One pulse out for each pulse in. Menu selectable polarity.

Communications

Bi-directional RS232C, USB or Ethernet interface.

Analog Output

(Optional)

Voltage (AO)

0 to 5 Vdc, 5mA max load (isolated or non-isolated)

Current (IO)

4 to 20mA, 500 ohm,max load. (isolated or non-isolated) , 1 to 5Vdc possible using 250 ohm resistor 16 bit resolution.Front panel push button programmable for full scale and offset RPM ranges.

Alarm Capability:

Two alarm set points

High or Low alarm limits, Latching or Non-Latching, Front panel push button programmable Hysteresis, dead band and low limit lockout are programmable, Relays can be set as fail-safe. Alarms can be reset Manually or Automatically. Remote reset via auxiliary input.

Alarm Outputs

Two Form C relay contacts, rated 1A at 115 VAC or 230 VAC

Remote Programming

Unit can be remotely programmed using optional communications interface and PM Remote Software.

Environmental

Indoor use only, Installation category II per IEC 664

Temperature

-10 degree C to 50 degree C operating per IEC 61010-1

Humidity

Maximum relative humidity 80 Percent for temperatures up to 31 degree C,decreasing linearly to 50 Percent relative humidity at 40 degree C.

Electrical Safety

Meets EN61010-1:2001,EC low voltage directive 72/23/EEC and 89/336/EEC


Description:-

The ACT-3X Panel Tachometer is a powerful NIST calibrated fully programmable tachometer and totalizer. It accepts inputs from all Monarch speed sensors or from any standard TTL generating device. The unit operates from 120/240Vac input power or from 12 or 24Vdc input power (optional).Programing is easily performed through the 5 front panel push buttons or using the optional PM Remote Software. Set up for single channel monitoring. Programmable scale factor with menu selection for multiple pulses per revolution, linear rates, to talization, single event trip speeds (using auxiliary input) and rateof change in rpm. A TTL pulse repeater output is standard.

Features:-

  • 1/8 DIN sized
  • 5 Digit LED display
  • 5 to 999,990 RPM range
  • Universal sensor inputs
  • N.I.S.T. Traceable Certificate of Calibration included
  • User configurable with front panel push buttons or Optional PM Remote Software
  • View real-time data on PC*
  • Record data in .CSV format in real-time*
  • Universal A/C power 100 to 240 VAC, 50/60Hz or optional 12or 24VDC power
  • Standard pulse repeater output
  • Single event capture from start and stop pulses, in units such as MPH, CM/sec, etc. Using two sensors - for linear rate of travel on second input channel
  • Optional 4-20mA or 0-5VDC scalable output
  • Optional Ethernet or USB communications
  • Optional alarm relay outputs

Specifications:-

Speed Range

5 to 999,990 RPM (single pulse per revolution), 0.5 to 999,990 RPM (10 pulses per revolution). Speeds below 5 RPM are possible with multiple pulses per revolution

Input Frequency Range

0.083 Hz to 80 kHz

Totalizer/Counter

Display Range

0.001 to 99,999 (Only top 5 digits are shown for 100,000-999,990) Max # of counts=16,777,216 even with 0.001 scale

Input Configuration:-

Universal Inputs

1 to 9,999 pulses per revolution, front panel push button programmable TTL input and 1.1V to 50VAC signals, Opt: -1 to-50VDC

Accuracy

+/-0.001 Percent of reading or +/-1 displayed resolution (Standard Gate), +/-0.06 Percent of reading or +/-1 displayed resolution (Fast Gate).

Resolution

Up to 0.001 RPM, 10 RPM (100,000 to 999,990RPM).

Display

5digit, 0.56 inches (14 mm) high red LED.

Display Update

Menu Selectable between: 0.5 second above 120 RPM, 1 second above 60 RPM and 1.5 seconds above 40 RPM.

Max Measurement Rate

Up to 100 times per second (Standard Gate) or up to 1000(Fast Gate) dependent on input frequency. Input must be measurement rate.

Scaling:

Programmable scaling

0.0001 to 9999.9 (front panel push button programmable).

Decimal Point

User Selectable (0-3) decimal places max (front panel push button programmable).

Memory

Maximum, minimum and last reading recall from front panel push buttons.

Dimensions

1/8 DIN by 4.5 inches (114 mm) deep.

Panel cut out

3.58 inches x 1.74 inches (91 x 44mm)

Input Power:

Standard

100 - 240 VAC +/-10 Percent, 50/60 Hz, Optional:12 or 24 VDC +/-20 Percent, Isolated, 8VA

Inputs

Universal input for optical, proximity, two wire or three wire magnetic, in frared or laser sensors. TTL input or 3.3 VAC to 50 VAC input.Standard input is 1 pulse per revolution.

Sensor Excitation

5VDC or optional 12VDC or 24VDC to sensor.

Recommended Sensors

Optical - Monarch ROS-W, ROS-P-25, ROS-HT-W-25 , ROSM-5WProximity - Monarch P5-11 Magnetic - Monarch M-190W or MT-190W Infrared -Monarch IRS-W Laser - Monarch ROLS-W, SLS-115/230 Inductive - Gas Engine GE-200(requires amplifier)

Pulse Repeater Output

Standard , 0 to 5 V TTL compatible. One pulse out for each pulse in. Menu selectable polarity.

Communications

Bi-directional RS232C, USB or Ethernet interface.

Analog Output

(Optional)

Voltage (AO)

0 to 5 Vdc, 5mA max load (isolated or non-isolated)

Current (IO)

4 to 20mA, 500 ohm,max load. (isolated or non-isolated) , 1 to 5Vdc possible using 250 ohm resistor 16 bit resolution.Front panel push button programmable for full scale and offset RPM ranges.

Alarm Capability:

Two alarm set points

High or Low alarm limits, Latching or Non-Latching, Front panel push button programmable Hysteresis, dead band and low limit lockout are programmable, Relays can be set as fail-safe. Alarms can be reset Manually or Automatically. Remote reset via auxiliary input.

Alarm Outputs

Two Form C relay contacts, rated 1A at 115 VAC or 230 VAC

Remote Programming

Unit can be remotely programmed using optional communications interface and PM Remote Software.

Environmental

Indoor use only, Installation category II per IEC 664

Temperature

-10 degree C to 50 degree C operating per IEC 61010-1

Humidity

Maximum relative humidity 80 Percent for temperatures up to 31 degree C,decreasing linearly to 50 Percent relative humidity at 40 degree C.

Electrical Safety

Meets EN61010-1:2001,EC low voltage directive 72/23/EEC and 89/336/EEC


Contact Us

17-B, Tarun Industrial Estate, Mogra Pada, New Nagardas Road, Andheri (East), Mumbai, Maharashtra, 400069, India
Phone :+917259672294