Analog Input from
0 - 75mV from DC Shunt.
Under Range 'UndEr' Over range 'ouEr' indication for 0-75mV.
0 to 20000 (5 digit) counts of Ampere rate configurable as per Second, Min, Hour.
0 to 999999 (6 digit) counts of Ampere Hour Totalizer.
0 to 999999 (6 digit) Batch counter to know total no. of Batch completed.
Field programmable decimal point selection for Ampere Indication by users.
Better than 0.1% of full scale reading..
By 3 keys on front panel i.e. Keys.
2 Independent set points for Ampere Hour Totalizer setting.
2 independent NO/C/NC contact for Ampere Hour Totalizer setting.
5Amp. / 250VAC, 5Amp. / 30VDC at resistive load.
L & H, H & VH, L & VL control action facility individual for each relay.
Auto reset pulse output for Batch application.
5 Digit for Ampere rate OR 6 Digit for Totalizer, selectable by using (+) key on Front panel.
8 L.E.D.'s for RL1, RL2, TX, RX, PROG., SQR, RATE & TOTAL.
Non-Volatile memory to store the Totalizer value, Batch count in case of
power failure with 4 options of power up recovery i.e. No memory recovery,
Batch memory recovery, Totalizer memory recovery & All memory recovery.
Provision for Total reset from the panel as well as remote reset from back
Terminal through potential free contacts input for Ampere Hour Totalizer.
230VAC +10% OR 110VAC +10% OR 24VDC.
Panel mounting / Wall mounting for flameproof model.
96(W) X 48(H) X 120(D) in mm. OR 72(W) X 72(H) X 120(D) in mm ( Including back side connecter )
92(W) X 44(H) in mm. OR 68(W) X 68(H) in mm.
ABS Plastic, Black Color for [96(W)X48(H)X120(D)] & White Color for [72(W)X72(H)X120(D)]
a) Isolated RS485 Serial port with MODBUS RTU Protocol output for PC interface.
b) Isolated 4 to 20mA retransmission programmable output for recorder or PLC proportional to selective range.
c) Flameproof version is available on request for hazardous application.
MODBUS RTU Protocol support to update instrument setting through PC. Powerful SCADA software is available.