AMBETRONICS ENGINEERS PVT. LTD.
Programmable Sequential Timer PM

Programmable Sequential Timer PM

Send Inquiry

PT 130  Programmable Sequential Timer

FEATURES:

 

  • Used latest Micro controller based technology.
  • 5 Digit 7 segment bright red L.E.D. display.
  • Program setting by three soft membrane keys On the front panel.
  • Built in Preset Batch Counter in 4 digit.
  • Up to 34 Channel Independent Relay output.
  • RESET &HOLD function from front & backside.
  • Output 1NO/C/NC contact rated 6A at 230VAC.
  • Built-in watch-dog circuit for fail safe operation.
  • Compact in size & easy to set & operate.
  • Non-volatile battery backup to hold the data in case of power failure.
  • Power fail three conditions programmable by users 

 

APPLICATIONS: 

 

  • Hydraulic press sequence control.
  • Blending and storage silos in cement industry,
  • bag filters,
  • dust collectors type tube curing press,
  • pot header in rubber Industry,
  • machine tools sequence etc. 

 

TECHNICAL SPECIFICATIONS:

Display

5 Digit of 13.0mm. bright L.E.D display.

Range

0-999 (3 digit) Sec / Min / Hour ON time programmable by users.

0-999 (3 digit) Sec / Min / Hour OFF time programmable by users.

Resolution

0.01, 0.1, 1 programmable by users for both time ON time and OFF time.

Accuracy

Better than 0.01%

Time base

11.059 MHz quartz crystal time base.

Setting

3 membrane keys on front panel

Relay Action

Programmable by selecting ON time or OFF time should start first.

Output

1NO/C/NC rated 6A at 230VAC for each relay.

Supply

230V AC A10% 50Hz, 110V AC A10% 50Hz, 24V DC.

Mounting

Panel mounting.

Dimension

96(W) X 48(H) X 120(D) mm. for PT-130-2 (2 channel)

96(W) X 96(H) X 120(D) mm. up to PT-130-10 (10 channel)

192(W) X 96(H) X 210(D) mm. up to PT-130-34 (34 channel)

Cutout

92(W) X 44(H) mm. (2 Channel)

92(W) X 92(H) mm. (10 Channel)

188(W) X 92(H) mm. (34 Channel)

Cabinet

ABS Plastic Black / White colour.

Terminal

18Nos. 'L' type connector for 'Y' type Lugs.

Channel

2 Channel to 34 Channel.

Mode

Count Down mode, Count up mode.

Batch Counter

Built in preset cyclic counter will count number of cycle completed.

Hold(IP1)

Manual by pressing (+) key or remote hold from back panel terminal by

shorting 'IP1', with (+V) terminal and short again both terminal to release

the hold function as toggle switch function.

Reset (IP2)

Manual by pressing (-) key or remote reset from back panel terminal by

shorting IP2 with (+V) terminal.

Built in

+12 VDC supply