AMBETRONICS ENGINEERS PVT. LTD.
Temperature Transmitter

Temperature Transmitter

Send Inquiry

We have appointed a well qualified team of experts who help us in manufacturing and exporting an excellent stock of Temperature Transmitter. Extensively installed in the industries of chemicals and pharmaceuticals where data monitoring is essential, these transmitters are strictly subjected to a loop test for assuring their proper functioning. In addition to this, the offered Temperature Transmitter is also used in the soaking pits and smelter plants of iron & steel industries.

Features

  • Easy-to-read display
  • Fast Response
  • Accurate sensing 

FEATURES:

  • Highly Reliable, Fast, Accurate Sensing Technology
  • User Friendly, Simple To Operate & Easy To Install
  • Power On Startup Through Intelligent Electronics, Self Driven Menu
  • Easy-to-read Display, Fast Response
  • Easy Programming With Password Protection
  • Software Calibration- No Trim pots
  • Loop Test, Assures Proper Operation Of The Transmitter
  • Industrial Standard, 4~20 mA O/P With Respect To The Full Scale Of Input Type
  • Built-In Reverse Polarity Protection
  • Reduced Operating Maintenance And Installation Cost
  • Excellent Long Term Stability.

APPLICATIONS:

  • Oven & BOD, Incubator, Humidity Chamber
  • Winding Temperature Of Generators, Bearings, Motors & Transformers
  • Foundries For Heat Treatment Application
  • Chemical & Hazardous Area Where Data Monitoring is Essential
  • Iron & Steel Industry For Soaking Pits, Oxygen Plate, Smelter Plant
  • Cement Plants For Process Automation
  • Water Purification & Treatment Plants
  • Primary & Auxiliary Temperature Scanning Of Boilers
  • Sugar Industry For Pan Alternation, Dailer Automation
  • Paper & Pulp Industry For Washers, Head Box Feed, Bleachers Etc.
  • Chemical & Petrochemical Industries
  • Water Pumping Stations
  • Power Plants. 

TECHNICAL SPECIFICATIONS

Input

J type (Fe- CON)

K Type (Cr - AL)

RTD PT100

Range

0 ~750oC

0 ~ 1200oC

-100 ~ 500 oC

Resolution

1oC

1oC

1oC

Accuracy

+ 0.25% of full scale

+ 0.25% of full scale

+ 0.25% of full scale

Compensation

Automatic Cold Junction Compensation for thermocouple (J or K type) Specify cable length While ordering

Sensor Probe Details

Please specify while inquiring

Loop Output

Industrial standard, 4~20 mA with Permissible load 750 ohms at 24 VDC, 25 mA

Display

0.5 inches, 3 digit L.C.D. Display/0.4inches , 4 Digit L.E.D. Display

Set Point

Two Independent Set Points, AL1 & AL2 with Blinking Indication & programmable Latch / Non Latch facility, only for indication purpose (There is no relay output)

Setting

Setting by 4 keys on front panel, i.e. 'SET/NEXT','UP','DOWN','TEST/BACK'

Monitoring : Sensor

Open / Under / Over

1)      By Display : Sensor Open/Break Shows oPn Under range shows Und & Over range shows Our

2)      By Loop current : Upscale current : 22mA, Downscale current : 3.6mA ~3.8mA, Programmable by User

Supply Voltage

14 ~ 36 VDC, normally 24 VDC ,25 mA

Operating Temperature

-40~85oC

Relative Humidity

Below 95 % non Condensing

Enclosure Detail

Weather Proof (WP)

Flame Proof (FLP)

Protection Class

IP-65

IP -65 , CMRI approved for II A & II B Gas Group

Cabinet Material

Polycarbonate, Grey colour

Cast Aluminium alloy, LM-6/ C.I. Enclosure

Cable Entry

1 No, Thermoplastic cable gland (IP - 68)

1 No, Double Compression Cable Gland (Ex - Proof), inch ET type

Dimension

120 (H) x 80 (W) x 55 (D) in mm

145 (H) x 185 (W) x 100 (D) in mm

Mounting

Wall Mounting / Stand Mounting

Wall Mounting / Stand Mounting

Weight

250 Grams

1 KG