- Minimum Order Quantity :
- Unit of Measure :
- Accuracy :
- +/-0.1 percent Of Full Scale Range. %
- Material :
- Poly-carbonate, Grey Color
- Voltage :
- 4 - 20 mA Loop Current Input from any 2 / 3 Wire Process Transmitter Milliampere (mA)
- Size :
- 120(H) x 100(W) x 60(D) in mm
- Weight :
- Approx. 250 Grams (g)
- User Programmable With Password Protection.
- Easy Programming with Push Buttons for WP & PM Model.
- Temperature coefficient of accuracy 0.005 Percent FS/Deg.C
- Software Calibration No Trimpots.
- Reverse Polarity Protection.
- Loop Voltage Drop <4.8 VDC.
- 4 - 20 mA Loop Current Input from Transmitters.
- Accuracy +/-0.1percent Of Full Scale Range.
- 4/5 Digit LED Display.
- Range Locking /Unlocking Facility.
- Offset Facility To Compensate Field Error.
- Operational Mode Linear / Square Root; Programmable by user.
- No external Power Supply is required.
- Provides Process value Indicator in various Industrial Control & Measurement Application such as Pressure, Flow, Level, Temp., Humidity etc.
- Remote Indicator at point of measurement or at control end especially where there is no power source
- Being Non Voltage Producing Device can be directly used in Hazardous Area with Suitable Enclosure
- Replaces an Analog Meter with no additional wiring and power connection
- Can be inserted at any point in signal loop as a stand alone as it requires no external power
- Remote Indication location on tank taps as used in liquid level sensing & control
4-20 mA Loop Current Input from any 2 / 3 Wire Process Transmitter
LPI - 450 -WP :(-1999 to 9999)Â with AL1& AL2 indication
0001, 000.1, 00.01,0.001
Adjustable upto +/-10Percent of range
0.39 inch 5 Digit Red LED Display
Display Update Rate
Linear mode- 1 sec;Square root mode- 1sec
i) Display shows UndEr/Undr , when I/P current falls below set UNDER value (from 3.6mA to 3mA,settable)
ii) Display show souer, when I/P current goes above set OVER value (from 20.5mA to 21mA,settable)
Linear & square root; programmable by user
Linear : +/-0.1Percent of span ; Square root : +/-0.2 PercentÂ Â of span
Temperature coefficient of accuracy
0.005 Percent FS/Deg.CÂ Â Â
Warm up Time
Loop voltage drop:< 4.8V DC
-10 to 50 Deg.C
Below 95 Percent non condensing
Polycarbonate, Grey colour
1No., Thermoplastic Cable Gland (IP-68)
120(H) x 100(W) x 60(D) in mm
Wall Mounting / Stand Mounting
Approx. 250 Grams
17-B, Tarun Industrial Estate, Mogra Pada, New Nagardas Road, Andheri (East), Mumbai, Maharashtra, 400069, India